Oxyscan 100

 

Oxyscan 100

The Oxyscan 100 is a simple ppO2 Monitor with preinstalled software for controlling a SPC (Setpointcontroller)

  • Switch on by short push of the Piezo switch / shows ON and  press the Piezo 3 x again / ON
  • switch off manuall over 3 x short press the Piezo switch ....OFF.... 1 x press again
  • Calibration with air / oxygen  possible
  • After calibration is activated up to manuall switch off
  • Low and High Alerts  0.4 and 1.6 visual (HUD))
  • two setpoints for the solenoid  ( 0.7 and 1.2 ) switchable during the dive
  • other alarms and solenoid setpoints possible
  • Power supply: batterie 1/2 AA
  • Not suitable for mountain lake diving!
  • Pressure tight to 328 feet / 100 meter

Equipment:

  • HUD (Head Up Display)
  • Single or double console
  • Arm cord
  • Various sensor heads

Battery

  • The used battery is a 1/2 AA